Today I built a replica of the A3630 030 CPU card. The A3630 CPU card came with non CR Amiga 4000D models (the card works on the A4000T and on the A3000D/T also). The CPU card replica PCB is made by Chucky, read more about it here if you are interested in getting one yourself!

I got an (original Commodore made) A3630 in 2005, mainly for testing purposes. It was placed in storage for 15 years and I failed to check the capacitors on it. Sure enough the capacitors had leaked, the board had a fishy smell to it.

When I recapped the genuine C= A3630 board one solder pad lifted off the PCB (very common if capacitor have leaked for a long time). Sure, that is not a big issue, can be fixed quite easy with a bodge wire. But I thought rebuilding the A3630 it with a new ReA3630 PCB was a better option.

I decided to use the CPU and the KEL male edge connector from my current card instead of wasting a new mint in box unobtainium KEL connector from my stash on such a low end card. I removed the CPU from the card by using a hot air rework station. I used a desoldering gun to remove the KEL connector by desoldering each of the 200 solder points for it.

As you can see it is a quite simple card, especially if one do not mount the socket for the FPU. Since my main usage of this card is for testing purposes, the 33MHz FPU and crystal will be used on my ReA3000 instead.