GottaGoFaZt3r 256 MB Zorro 3 memory card

GottaGoFaZt3r 256 MB RAM Zorro 3 card for the Amiga

GottaGoFaZt3r is a memory card for Zorro 3 big box Amiga computers that you can build or buy premade. Find out more information about the GottaGoFaZt3r Amiga memory card here.

Amiga with a Zorro 2 bus supports up to 8 MB memory on the Zorro 2 bus, that memory is shared with other devices on the bus so if you have a graphics card with 2 MB you can only have 6 MB additional fast mem on the Zorro 2 bus. With Zorro 3 that is IIRC increased to 1 GB.

Phase 5 Fastlane vs GottaGoFaZt3r

Before this card was released there was not a huge offering of Zorro 3 memory cards, the most famous was probably the Fastlane from Phase 5, a huge full size Zorro 3 memory card that uses rare 30 pin memory and commanded high prices on the second hand market. The Fastlane has 16 30-pin SIMM sockets and can be expanded to 256 MB, but that would require 16 very rare 16 MB 30-pin SIMM memory. Phase 5 made awesome hardware back in the day but time marches on.

While the Fastlane was also a SCSI card the GottaGoFaZt3r is just a memory card. Where the Fastlane is full size the modern card is a mini half size Zorro 3 card. It is autodetected and just does one thing, adding more memory to your Z3 Amiga.

Whats the point of a 256 MB memory card in an Amiga?

The GottaGoFaZt3r can be built to be a 128 MB card or 256 MB card. Off course I went for the 256 MB option. While this could be seen as just bragging rights to be able to pump up your Amiga with a 256 MB memory card, keep in mind that this is actually usable on an Amiga, even with oldschool applications thanks to being able to use the memory card as a huge RAM disk.

Some comments about building the GottaGoFaZt3r Amiga memory card

Memory and CPLD was sourced from China, other than those parts its a very straight forward BOM. The build is also very simple. While the BOM does not mentions a capacitor at C1 I got the recommendations to add one so thats what I did.

My setup

In total there is 660 MB Fast RAM in my Amiga 4000TX

I installed the GottaGoFaZt3r card in my A4000TX. Currently the memory setup looks like this on my Amiga 4000TX which is alsy my primary Amiga.

  • GottaGoFaZt3r: 256 MB
  • BFG9060: 128 MB
  • ZZ9000: 256 MB

I will add 128 MB fast ram to the motherboard (which will be used as 96 MB by the A4000TX), so in the future I will have 736 MB fast mem in my daily driver. Currently the memory is reported as 660 MB as I have a memory stick that is not really supported by the TX so it only partially works.